Skip to main content

Free US shipping on every order

Chevrolet Silverado 1500 tonneau covers

Hard aluminum tonneau covers cut for the Chevrolet Silverado 1500, 2014 to 2026. Locking, sealed on all four edges and installed without drilling your truck.

Model years
2014 to 2026
Bed lengths
5 ft 8 in, 6 ft 6 in, 8 ft
Covers that fit
6 models

Fits over the factory bed rail caps without removing them.

Covers that fit the Silverado 1500

One-Piece

Vaultline HD

The hard cover standard

1,600 lb load rating

$2,494

Free US shipping

View cover

Retractable

Vaultline R7

Full retract, sealed canister

500 lb load rating

$2,149

Free US shipping

View cover

Retractable

Vaultline R5

Manual retract, low profile

400 lb load rating

$1,649

Free US shipping

View cover

Folding

Vaultline F3

Hard tri-fold

400 lb load rating

$1,099

Free US shipping

View cover

Folding

Vaultline F3 Lite

Entry hard tri-fold

250 lb load rating

$799

Free US shipping

View cover

How to measure your bed

Manufacturer bed names round the real number. A 5 ft 8 in bed is rarely exactly that. Measure it yourself and you will not be guessing.

  1. 01

    Drop the tailgate

    Open it fully so nothing blocks the tape at the back of the bed.

  2. 02

    Measure the floor

    Run the tape along the bed floor from the bulkhead to the tailgate hinge line.

  3. 03

    Round to the nearest inch

    Send us that number with your year and trim and we confirm the exact cover.

Chevrolet Silverado 1500 cover questions

Which bed lengths does the Chevrolet Silverado 1500 come in?

The Chevrolet Silverado 1500 is offered with 5 ft 8 in, 6 ft 6 in and 8 ft beds across the 2014 to 2026 model years. Each of our covers is cut to a specific bed length, so measure from the bulkhead to the inside of the closed tailgate before you order.

Do I need to drill my Silverado 1500 to fit a cover?

No. Every cover clamps to the factory bed rails and comes off again without leaving a mark. Most Silverado 1500 owners finish the install in 20 to 30 minutes with a 10 mm wrench.

Will a cover work with a bed liner on my Silverado 1500?

Spray-in liners are no problem. A drop-in liner with a thick rail lip can change the clamping surface, so tell us which liner you have and we will send the correct clamp kit at no extra cost.

How waterproof is it, really?

The four-sided EPDM rubber gasket forms a sealed perimeter rather than the weathered overlap most covers use. We have tested it through heavy rain, snow and automatic car washes. Your cargo stays dry.

What exactly does the lifetime warranty cover?

Every structural component: the aluminum panels, hinges, frame and latches, for the life of the product under normal use. Seals and wear items are covered for three years. No registration is required.

Can I stand on it or carry heavy loads on top?

Yes. The one-piece covers are rated to 1,600 lb evenly distributed, so rooftop tents, cargo boxes and kayaks are all fine. Avoid point loads such as a car jack.

Confirm your Silverado 1500 fit

Send your year and bed length and we will confirm the exact cover and clamp kit. Or call (307) 454-0600 and we will do it on the spot.

Bed liner, tool box, RamBox, roll bar. Anything that changes the fit.

We reply within one business day. No spam, and we never sell your details.