
Vaultline HD
The hard cover standard
One rigid 6061-T6 aluminum panel, a keyed cylinder lock and a four-sided EPDM gasket. It clamps to the bed rails in about half an hour and does not come off again unless you want it to.
$2,494
Free US shipping
Every cover here is aluminum, sealed on all four edges and clamps on without drilling your truck. The difference between them is how you want to open the bed.
A single rigid aluminum panel over the full bed. The strongest, quietest and most secure cover we build, and the one to buy if you haul gear you cannot replace.

The hard cover standard
One rigid 6061-T6 aluminum panel, a keyed cylinder lock and a four-sided EPDM gasket. It clamps to the bed rails in about half an hour and does not come off again unless you want it to.
$2,494
Free US shipping

Rack-ready one-piece
The HD panel with T-slot rails machined into the top skin, so a roof tent, cargo box or crossbars mount without drilling the cover.
$2,894
Free US shipping
Aluminum slats that roll back into a low-profile canister at the bulkhead. Open the whole bed in seconds without taking anything off the truck.
Full retract, sealed canister
Interlocking aluminum slats roll into a sealed canister at the bulkhead. Lock it closed, lock it open, or stop it anywhere in between.
$2,149
Free US shipping
Manual retract, low profile
The same slat and rail system as the R7 with a manual pull strap and a three-position latch. Lower price, same weather sealing.
$1,649
Free US shipping
Three hinged aluminum panels that fold flat against the cab. The most affordable way into a hard cover without dropping to vinyl.

Hard tri-fold
Three aluminum panels with a honeycomb core, hinged on weather-sealed joints. Folds flat behind the cab in under a minute.
$1,099
Free US shipping

Entry hard tri-fold
The F3 geometry in a thinner panel with a simplified clamp. Same aluminum skin and the same seal, lighter duty hinges.
$799
Free US shipping
Racks, lighting, seals and spare hardware. Everything here bolts to a cover you already own without new holes in the truck.
Crossbar rack for hard covers
Two adjustable crossbars that clamp to the bed rails or drop straight into the HD Off-Road T-slots. Carries kayaks, lumber and roof boxes.
$389
Free US shipping

Under-cover lighting
Two sealed LED strips that adhere under the cover and wire into the bed light circuit or a switched 12V feed. No drilling.
$129
Free US shipping
Replacement keyed cylinders
A matched pair of keyed cylinders with two keys. Rekey a used cover, or match a second cover to the same key.
$59
Free US shipping
Replacement EPDM gaskets
Full four-sided EPDM gasket set cut to length, plus the adhesive primer. Restores the seal on an older cover in an afternoon.
$79
Free US shipping